7884 and 7896 Series: 3 Ply Silicone Elbows

Stocked with standard lengths

7884 and 7896 Series elbows serve a dual purpose!
Can be used as a coolant hose
Can be used as a charge air connector (CAC)

Construction:

Silicone hose with 3-plies of Meta-Aramid Reinforcement

Specifications:

Meets or exceeds the operating requirements of SAE J20 R1 Class A
Meets or exceeds the operating requirements of TMC RP303B Class I Grade II
Temperature range is -65°F (-54°C) to +500°F (+260°C)
Working pressure is 1/3 of the burst pressure
Custom Wall Thickness is .140”/.190”

Applications:

For heavy duty pressure connections in hostile engine environments
Resists hardening, cracking, cold leaks, aging, and many chemicals
Ideal for extreme temperature and various pressure ranges where high performance levels are required
For connection between the turbocharger and the engine
Resists chemicals, steam, ozone, coolants, and aging conditions normally found in the engine environment

7884 Series: 90° Silicone Elbows

Part Number	Inside Diameter Inch MM		Outside Diameter Inch MM		Leg Length - Inches (Avail. Clamp Space)	Bend Radius Inches	Burst Pressure - PSI SAE J20 R1 TMC		Weight LBS	Clamp
7884-075	0.75	19	1.07	27	6.00	1.50	325	125	0.50	2582-0012
7884-100	1.00	25	1.32	34	6.00	2.00	300	125	0.50	2582-0016
7884-125	1.25	32	1.57	40	6.00	2.50	275	125	0.50	2582-0020 or 2584-0212
7884-150	1.50	38	1.82	46	6.00	3.00	250	125	0.50	2582-0024 or 2584-0212
7884-175	1.75	44	2.07	53	6.00	3.50	225	125	0.50	2582-0028 or 2584-0262
7884-200	2.00	51	2.32	59	6.00	4.00	200	100	0.50	2582-0032 or 2584-0262
7884-225	2.25	57	2.57	65	6.00	3.38	175	100	1.00	2582-0036 or 2584-0312
7884-250	2.50	64	2.82	72	6.50	3.75	150	100	1.00	2582-0040 or 2584-0312
7884-275	2.75	70	3.07	78	7.00	4.13	125	100	1.00	2582-0044 or 2584-0362
7884-300	3.00	76	3.32	84	7.50	4.50	100	100	1.00	2582-0048 or 2584-0362
7884-350	3.50	89	3.82	97	8.50	5.25	75	100	1.50	2582-0056 or 2584-0412
7884-400	4.00	102	4.32	110	9.50	6.00	50	100	1.50	2582-0064 or 2584-0462
7884-500	5.00	127	5.32	135	13.50	7.50	N/A	N/A	1.50	2584-0562

*Specifications for reference only. Specific test data available on request.

7896 Series: 45° Silicone Elbows

Part Number	Inside Diameter Inch MM		Outside Diameter Inch MM		Leg Length - Inches (Avail. Clamp Space)	Bend Radius Inches	Burst Pressure - PSI SAE J20 R1 TMC		Weight LBS	Clamp
7896-075	0.75	19	1.07	27	6.00	4.00	325	125	0.50	2582-0012
7896-100	1.00	25	1.32	34	6.00	4.00	300	125	0.50	2582-0016
7896-125	1.25	32	1.57	40	6.00	4.00	275	125	0.50	2582-0020 or 2584-0212
7896-150	1.50	38	1.82	46	6.00	4.00	250	125	0.50	2582-0024 or 2584-0212
7896-175	1.75	44	2.07	53	6.00	4.00	225	125	0.50	2582-0028 or 2584-0262
7896-200	2.00	51	2.32	59	6.00	4.00	200	100	0.50	2582-0032 or 2584-0262
7896-225	2.25	57	2.57	65	6.00	4.00	175	100	1.00	2582-0036 or 2584-0312
7896-250	2.50	64	2.82	72	6.50	4.00	150	100	1.00	2582-0040 or 2584-0312
7896-275	2.75	70	3.07	78	7.00	4.00	125	100	1.00	2582-0044 or 2584-0362
7896-300	3.00	76	3.32	84	7.50	4.00	100	100	1.50	2582-0048 or 2584-0362
7896-350	3.50	89	3.82	97	8.50	4.00	75	100	2.00	2582-0056 or 2584-0412
7896-400	4.00	102	4.32	110	9.50	4.00	50	100	2.50	2582-0064 or 2584-0462

*Specifications for reference only. Specific test data available on request.

7884 Series: 90° Silicone Elbows

Available in the following hose ID sizes:

ID Fractional (Inch)

¾”

1”

1-1/4”

1-1/2”

1-3/4”

2”

2-1/4”

2-1/2”

2-3/4”

3”

3-1/2”

4”

5”

ID Decimal (Inch)

0.75

1.00

1.25

1.50

1.75

2.00

2.25

2.50

2.75”

3.00”

3.50”

4.00”

5.00”

ID Millimeter

19mm

25mm

32mm

38mm

44mm

51mm

57mm

64mm

70mm

76mm

89mm

102mm

127mm

*Additional, Custom & Reducer Sizes Available!

7896 Series: 45° Silicone Elbows